Building Supplies

Measuring and Layout Tools

Auxiliary Condensate Overflow Safety Switch The Auxiliary Condensate Overflow Safety Switch, is designed to detect clogged condensate drain lines and interrupt the thermostat circuit to shut off the unit before flooding occurs. The compact design of the ACS-5 allows for ease of installation in the auxiliary outlet of the primary drain pan when space is limited. The switch can also be configured to activate an audible and/or visual alarm circuitry. The ACS-5 comes complete with a Schedule 40 PVC 3/4" × 1" elbow that accepts a 3/4" male adaptor or drain line, 3/4" MNPT × 3/4" slip adaptor for use with female threaded pan outlets, and a switch/holder assembly that can easily be removed for inspection and maintenance. Easily installed in confined spaces Compact design for... Less

FAN FORCED WALL HEATERS WITHOUT SUMMER FAN SWITCH 4800 Watt Heater with Double Pole Thermostat -277V Fan forced wall mount heaters have an 18 gauge steel front with scratch resistant powder coat finish. Electric heaters feature an automatic reset thermal limit and steel block fin element. Vane axial fan blade is powered by a 600 RPM motor that projects airflow up to 175 CFM. Watts are selectable at time of installation; factory wired to higher wattage. Built-in thermostat with 50-90 F temperature range. Rough in dimensions are 14-3/16"W x 19-15/16"H x 4"D. Grill measures 15-3/8"W x 20-1/8"H. UL listed and CSA approved. 1 Year Limited Warranty. 19.94 L. 4.00 W. 14.19 H.

Line Voltage Thermostat, Digital, Non Programmable, Switch Type Dpst, Control Range 40 To 86 F, Heating Application, Differential 1 Deg F, Height 4 7/8 In, Width 2 3/4 In, Depth 1 In, 240 Vac, Full Load Amps 15 @ 240vac, Temp Settings Per Day N/a, Ul, Csa, Color White, Temp Sensitivity 1 Deg F, Sensor Thermistor Type, Lcd Display

Install integral on Baseboard, rated 22 amp @ 120 VAC, Single Pole Thermostat Snap Action Type. Field Installed in Junction Box. (Note: Thermostat comes assembled to end cap)

Oil Primary Control, Current @ 120 Vac 7.4 Amps, Ignition Rating 360 Volt Amps, Ignition Intermittent, Mounting Box/burner Housing Mount, Safety Switch Timing 45 Seconds, Uses Cadmium Cell, Height 4 1/4 Inches, Depth 2 1/2 Inches, Width 4 3/8 Inches, Used With 24 Vac Thermostat

Fork Level FORKLIFT BLADE TILT INDICATOR Visualize Forklift Blade Tilt At A Glance! This simple device can save thousands of dollars by helping to prevent forklift errors that damage inventory and pallet racks, as well as increasing employee safety. Fork Level is a forklift accessory that indicates blade tilt to within 1/10 of 1 from the driver's seat. Adaptable to all types of tilting vertical forklift masts, the fork level increases productivity and is an excellent training tool. Installs in minutes: Mount the anchor blocks to the forklift mast and truck cage using the included 3M industrial tape, measure and level the forks, and slide the indicators to the point when the colored rod is visible between them. Once installed, it's now easy to see when the forks are parallel... Less

Float Switch, Mechanical, Diaphragm, Normally Open, - Connection, Max. Amps Running 10, Hp @ 1 Phase - 115v -, Hp @ 1 Phase - 230v -, Voltage 115, Wire Gauge 18, Pumping Range Min./max. 1 To 3, Length -, Width -, Height -, Fitting -, Va Rating -, Min. Water Level Adjustment -, Max. Water Level Adjustment -, Operation -, Stem Material -, Float Material Buna, -, For Use With Pumps Up To 10 Amps Max And Up To 1/3 Hp, Specific Gravity -, Body Material -, Control Range -, Max. Voltage -

Electric Heat Line Voltage Thermostat, Non Inductive Rating @ 120 Vac 22 Amps, Non Inductive Rating @ 240 Vac 22 Amps, Non Inductive Rating @ 277 Vac 19 Amps, Switch Action Open On Rise, Switch Dpst, Temperature Differential 3 Degrees Fahrenheit, Temperature Range 40 To 80 Degrees Fahrenheit, Height 4 17/32 Inches, Width 2 29/32 Inches, Depth 2 3/16 Inches, Color Beige

Qmark TC1 Clear Plastic Universal Lockable Thermostat Guard. Dimensions: 7L x 4.28H x 2.74D.

3" Type L Pellet Pipe Tall Cone Flashing for Flat Roofs from the VP CollectionFlashin gs are used to seal the opening where the venting penetrates the roof and to divert rain and snow down from the roof and away from the pellet pipe system. It is important to choose flashing that matches the pitch of your roof. This flashing works for flat roofs and has a 12" tall cone. Note: To determine your roof pitch, measure the number of inches from the end of a level 12” ruler down to the roof. This is the rise for 12 inches of run. For example, a rise of 5 inches is a 5/12 pitch.The VP Collection features proven coupling joint connects in seconds to assure joint integrity, gasketed joint design, painted pipe lengths available for interior use. The rolled-over male end eliminates sharp edges,... Less